The History of Leather
Table of Contents
ToggleThe use of animal hides for clothing and basic survival items can be traced back as far as Early Man in the Paleolithic period. Cave paintings discovered in caves near Lerida in Spain depict the use of leather clothing. Man hunted wild animals for food but removed their hides and skins from the dead carcass and used them as crude tents, clothing and footwear.
Early man realized that the skins rapidly putrefied and thus became useless. They needed a way to preserve the hides. The earliest method was to stretch the hides and skins on the ground to dry, rubbing them with fats and animals brains while they dried. This had a limited preserving and softening action. Primitive man discovered also that the smoke of wood fires could preserve hides and skins, as did treating them with an infusion of tannin-containing barks, leaves, twigs and fruits of certain trees and plants. It seems likely that man first discovered how to make leather when he found that animal skins left lying on a wet forest floor became tanned naturally by chemicals released by decaying leaves and vegetation.
Much later the use of earth salts containing alum as a tanning agent to produce soft white leather was discovered. The alum leathers could be dyed with naturally occurring dyestuffs in various plants. In Egyptian times leather was used for sandals, clothes, gloves, buckets, bottles, shrouds for burying the dead and for military equipment. In Egyptian tombs, wall paintings and artifacts depicted these uses of leather.
The Romans also used leather on a wide scale for footwear, clothes, and military equipment including shields, saddles and harnesses. Excavation of Roman sites in Great Britain has yielded large quantities of leather articles such as footwear and clothing.The manufacture of leather was introduced to Britain by the Roman invaders and by religious communities, whose monks were expert at making leather, especially vellum and parchment for writing purposes.
The ancient Britons had many uses for leather from footwear, clothing and leather bags, to articles of warfare. The hulls of the early boats, known as coracles, were also covered in leather. Through the centuries leather manufacture expanded steadily and by mediaeval times most towns and villages had a tannery, situated on the local stream or river, which they used as a source of water for processing and as a source of power for their water wheel driven machines. Many of these tanneries still exist, but in many towns the only remaining evidence is in street names, like Tanner Street, Bark Street and Leather Lane.
The earliest crude leathers were made by first immersing the raw hides and skins in a fermenting solution of organic matter in which bacteria grew and attacked the hides or skins, resulting in a loosening of the hair or wool and some dissolving out of skin protein. The hair or wool was then scraped off with primitive blunt stone or wooden scrapers and fat or meat still adhering to the flesh side was removed in a similar manner.
Tanning, the conversion of pelt into leather, was done by dusting the raw stock with ground up bark other organic matter and placing them in shallow pits or vats of tannin solution.Further additions of ground bark, were made from time to time until the tannin solution had penetrated right through the skin structure, taking up to two years for very thick hides. The leather was then hung up for several days in open sheds. The dressing of the leather involved paring or shaving it to a level thickness, coloring, treatment with oils and greases, drying and final treatment of the grain surface with waxes, proteins such as blood and egg albumins, and shellac to produce attractive surface finishes.
During the Middle Ages leather was used for all kinds of purposes such as: footwear, clothes, leather bags, cases and trunks, leather bottles, saddlery and harness, for the upholstery of chairs, and couches, book binding and military uses. It was also used to decorate coaches, sedan chairs and walls.The majority of the leather was tanned with oak bark but soft clothing, gloving and footwear leathers were tanned with alum, oil, and combinations of these two materials.With the discovery and introduction of basic chemicals like lime and sulphuric acid, tanners gradually abandoned their traditional methods and leather production slowly became a chemically based series of processes.
The growth of industrialization in the 18th and 19th centuries created a demand for many new kinds of leathers, e.g., belting leathers to drive the machines being introduced into industry, special leathers for use in looms in the textile industry, leathers for use as diaphragms and washers, leathers for use in transport and for furniture upholstery.
At the end of the nineteenth century, the invention of the motor car, modern roads, new ranges of coal tar dyestuffs, the demand for softer, lightweight footwear with a fashionable appearance, and a general rise in the standard of living created a demand for soft, supple, colorful leather. The traditional vegetable tanned leather was too hard and thick for these requirements and thus, the use of the salts of the metal chromium was adopted and chrome tanning became the tannage for modern footwear and fashion leathers. It produces soft, supple, beautiful and fine leathers, reflecting the way we live.
I hope you enjoyed this little history lesson!
Archives
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021